Sony 900 Sync To adjust the sync level, Component controls, SC Phase switch, Convert indicator

7	SYNC: To adjust the sync level
	CHROMA: To adjust the chroma level

c COMPONENT controls

Each is for adjusting the corresponding component video output (R/R-Y, G/Y, or B/B-Y).

d SC PHASE switch

Used to adjust the SC phase with respect to the reference signal (BB).

This switch will return to its original position when you release it. Press and hold the switch toward ADV to advance the phase or toward DELAY for delay.

7-4-13Internal Switches and Internal Boards – FC Board (Internal board of the optional HKCU- 953)

FC

POWER

CONVERT

1POWER indicator

2CONVERT indicator

FRAME

REF IN

3FRAME indicators

UN

LOCK

aPOWER indicator

The LED is lit when the power voltage inside the board is normal.

bCONVERT indicator

The LED is lit when the camera is operating in 24PsF mode and the HKCU-953 is supplying 60i/50i signals after frame conversion. It goes dark when the HKCU- 953 is supplying the input 24PsF signals as-is or when the camera is operating in 60i, 50i, 30PsF, or 25PsF mode.

cFRAME indicators

REF IN: The LED is lit when a subsidiary reference signal for frame lock is being supplied.

UNLOCK: The LED lights if correct lock to the subsidiary reference signal being supplied cannot be achieved.

HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls 101