Sony 950, 930, 900 manual HDVF-700A, HD Electronic Viewfinder, 15-1Appearance

7	h BRIGHT control
	Adjusts the brightness of the screen. This control has
	no effect on the output signals of the camera.

i TALLY switch

Controls the tally indicator e located on the front of the viewfinder.

HIGH: The tally indicator brightness is set to high.

OFF: The tally indicator is disabled.

LOW: The tally indicator brightness is set to low.

j ZEBRA (zebra pattern) switch

Controls the zebra pattern display on the viewfinder screen as follows:

ON: A zebra pattern appears and stays.

OFF: The zebra pattern disappears.

MOMENT: A zebra pattern appears and stays for about 5 seconds.

kDISPLAY/ASPECT switch

Turns the marker indication on and off, and switches between 4:3 and 16:9 aspect ratios for viewfinder screen display.

DISPLAY: When the marker indication is enabled with the camera, the marker indication on the viewfinder screen turns on and off every time you push the switch up to this position.

ASPECT: Each push of the switch down to this position toggles the mask display on and off.

7-15.HDVF-700A, HD Electronic Viewfinder

7-15-1Appearance

1 PEAKING control

2 PEAKING switch

3 Friction adjustment knob

4 Lift-lock release knob

5POWER switch

6 indicator

Front

Rear

qf External tally lamp

qg External tally dimmer control

Bottom

qh CAMERA connector

qj Mounting wedge

7Green tally lamps

8BRIGHT control

9Lock lever

q; CONTRAST control qa TALLY ON/OFF switch qs BATT indicator

qd Red tally lamps

HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls 136