Sony 900, 930, 950 manual 13-2Connector Panel, Iris/master black control block

7	C Control knobs (rotary encoders)
	In RM Menu mode, adjust the selected items on
	the touch panel. In Camera Menu mode, select

and adjust the menu items using the leftmost knob.

l Iris/master black control block

				4 IRIS/MB ACTIVE
				indicator
				5 MASTER BLACK
1 AUTO	IRIS
				control
button		AUTO	IRIS/MB
		IRIS	ACTIVE MASTER
			BLACK

2EXT lens extender

EXT

3 IRIS control

IRIS

AAUTO IRIS button

Press and light the button to automatically adjust

the iris according to the amount of input light. If you press the button when lit, it goes dark, and manual iris adjustment is enabled.

BEXT (lens extender) indicator

Lights when the lens extender is used on the

connected camera.

CIRIS control

When the AUTO IRIS button is not lit, you can adjust the iris manually by turning the control. When the AUTO IRIS button is lit, you can fine- adjust the reference value for automatic iris adjustment in a range of ±2f with this control. The adjustment mode of this control is specified at the factory as Absolute mode, which can also be changed to Relative mode using the RM Configuration menu under the Maintenance

menu.

DIRIS/MB ACTIVE (iris/master black active) indicator

Lights when the control mode is set as FULL or PART mode with the PANEL ACTIVE button. When this indicator is lit, iris/master black

controls from this unit are enabled.

EMASTER BLACK control

Manually adjusts the master black level. The adjustment mode of this control is specified at the factory as Relative mode, which can be changed to Absolute mode using the RM Configuration menu under the Maintenance menu.

m White balance/black balance control block

1 AWB button

2 ABB button

AWB ABB

WHITE

3 WHITE controls

BLACK

4 BLACK controls

dark when adjustment is completed. If you press this button when lit, the automatic adjustment is canceled, and the button flashes. To stop the flashing, press the button again.

BABB (auto black balance) button

Press to automatically adjust the black balance and black set. The button lights during adjustment and goes dark when adjustment is completed. If you press this button when lit, the automatic adjustment is canceled, and the button flashes. To stop the flashing, press the button again.

Note

When the adjustment mode of the BLACK controls is specified as Absolute mode,

automatic black balance adjustment with ABB button is disabled.

CWHITE (white balance) controls

Adjust the R/B white balance. The adjustment mode of these controls is specified at the factory as Relative mode, which can be changed to

Absolute mode using the RM Configuration menu under the Maintenance menu.

DBLACK (black balance) controls

Adjust the R/B black balance. The adjustment mode of these controls is specified at the factory as Relative mode, which can be changed to Absolute mode using the RM Configuration menu under the Maintenance menu.

7-13-2Connector Panel

1 CAMERA connector

2 MONITOR connector

Cover fixing screw

aCAMERA connector (8-pin)

Connect to the camera using the supplied remote control cable.

bMONITOR connector (BNC)

Connect to a color monitor to observe the signal from the camera.

AAWB (auto white balance) button

Press to automatically adjust the white balance. The button lights during adjustment and goes

HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls 134