Sony 930, 950, 900 manual Scene file control block, Menu operation block, IC card insertion block

7			1		2
	i Scene file control block
	1	2	3	4	5
			SCENE FILES		STORE

ASCENE FILES buttons

While the STORE button is flashing: When you press one of these buttons, the current setting data is stored as a file of the corresponding number.

When the STORE button is dark: The stored data can be retrieved by pressing and lighting up the button of the desired number. Press the lit button to turn it dark and resume the previous

status.

BSTORE button

To store a scene file, first press this button so that the button starts flashing, then press the SCENE FILES button of the desired number.

When file registration is completed, the STORE button goes dark. To cancel the registration, press the flashing button again before pressing the SCENE FILES button. The STORE button goes dark.

jMenu operation block

MODE

MULTI 3

1CARD

CONFIG

MAINTENANCE

FILE

PAINT

2

AMODE (mode select) buttons

Select the menu mode. If you press and light one of these buttons, the menu for the selected mode appears on the EL display. When the lit button is pressed again, it goes dark and the menu on the display also disappears.

MULTI: Selects Multi-Control menu to set the requirements for Master/Slave mode to set up multiple cameras in synchronization.

CARD: Selects IC memory card menu to initialize IC cards.

CONFIG: Selects Configuration menu to configure this unit and the entire camera system.

MAINTENANCE: Maintenance mode to set various camera maintenance items and the H and SC phases of CCU, etc.

FILE: Selects File operation menu to retrieve and transfer reference files, lens files and scene files in the video camera or on IC cards.

PAINT: Selects Paint control menu to adjust various paint items, such as white, black and

flare.

BControl knobs (rotary encoders)

Adjust the selected items on the touch panel.

CEL display/touch panel

Displays the menu selected with the MODE buttons and permits the displayed items to be adjusted.

kIC card insertion block

2

1

ACCESS

3

AIC card slot

Insert an IC card (which conforms to PCMCIA) to store reference files and scene files of the video camera or CCU (SRAM CARD ONLY).

To insert a card

[1]Slide the cover to open the IC card insertion block.

[2]Insert the card into the slot. When the card is correctly set, the ACCESS indicator lights in green.

Note

The data in the memory card is maintained by the battery built into the card. If the battery is exhausted, the data in the card will be lost. You can check the battery condition by the ACCESS indicator. If the battery becomes weak, replace the battery with a new one as soon as possible.

BEject button

Press to eject the inserted IC card.

Note

Do not eject a card when the ACCESS indicator is lit in red (it means that the data is being read

from or written to the card). This may erase data stored in the card.

CACCESS indicator

Shows the status of the IC memory card.

Indication	Meaning or Measures
Off	No card is inserted.
Lit in	There is a card in the slot. (The battery
green	condition is good.)
	The battery of the card in the slot begins
Lit in	losing its charge. Although the data are
orange	still maintained, replace the battery at the
	earliest opportunity..
	The battery of the card in the slot is
	almost exhausted. While the card stays
Flashes in	in the MSU-700A, the MSU-700A sup-
	plies the power to the card. However
orange	when the card is ejected, the data can-
	not be maintained. Replace the battery
	before using.
	Data are being read/written. If you eject
Lit in red	the disc in this condition, the data is not
	guaranteed. All the data may be lost

For battery replacement, refer to the instructions for the IC card.

HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls 108