Sony 900 Clear, 4 ND, Examples, Shutter mode when the ECS button is not lit, Iris control block

7	Examples
	1: Clear
	2: 1/4 ND

3: 1/8 ND

4: 1/16 ND

5: 1/64 ND

When the FILTER CTRL button is not lit, the button corresponding to the filter selected at the video camera lights.

CCC (color temperature conversion filter select) buttons

While the FILTER CTRL button is lit, press and light up one of these buttons to select the corresponding CC filter.

Examples

A: Cross filter

B: 3200K (clear)

C: 4300K

D: 6300K

E: 8000K

When the FILTER CTRL button is not lit, the button corresponding to the filter selected at the video camera lights.

pECS/Shutter control block (left) Gamma control block (center) Master gain control block (right)

1
ECS
ON
	ECS/SHUTTER	GAMMA	MASTER GAIN
2	3	4	5

AECS (Extended Clear Scan) button

Press and light up the button to set the video camera to ECS mode. Press again and turn off the button to set the video camera to Shutter

mode.

BON button

Turns on and off the ECS function (when the ECS button is lit) or the shutter function (when the ECS button is not lit). The function is ON when this button is lit.

CECS frequency/Shutter speed select buttons and display window

In ECS mode (when the ECS button is lit): The selected ECS frequency is displayed in the window. Press to select the desired scan frequency.

The frequency increases when the v (up) button is pressed and decreases when the V (down) button is pressed. It continuously changes when either button is kept pressed.

In Shutter mode (when the ECS button is not lit):

The denominator of the selected step shutter speed is displayed in the window. Press to select the desired shutter speed. The speed increases when the v (up) button is pressed and decreases when the V (down) button is pressed. It continuously changes when either

button is kept pressed.

DGAMMA select buttons and display window Select the step gamma. The selected value is displayed in the window. The gamma value decreases when the v (up) button is pressed and increases when the V (down) button is pressed. It continuously changes when either button is kept pressed.

Note

The higher the gamma effect, the lower the value.

EMASTER GAIN selects buttons and display window

Select the appropriate video gain according to the illumination of the subject to be shot. The selected value (dB) is displayed in the window. The gain value increases when the v (up) button is pressed and decreases when the V (down) button is pressed. It continuously changes when either button is kept pressed.

qIRIS/MB ACTIVE (iris/master black active)

button

Press and light up this button to enable the iris and master black adjustment functions of the unit. When the PANEL ACTIVE button is pressed, this button automatically lights. To disable only the iris/ master black control block of the panel, press this button so that it goes dark.

rMASTER BLACK control block

Turn the control to adjust the master black level. The adjustment value is displayed in the display window.

sCALL button

Press to send a call signal to the video camera, on which the CALL button lights. The tally lamps on the camera and the red tally lamp on the CCU light when not lit, or go dark when lit.

When the CALL button on the video camera is pressed, the CALL button on this unit lights and a buzzer sounds.

tCamera number/tally indication window

The number of the camera being controlled from this unit is displayed in orange.

When a red tally signal is sent to the camera, the number is displayed in black and the background of the number lights in red.

When a green tally signal is sent to the camera, the number is displayed in black and the background of the number lights in green.

When both the red and green tally signals are simultaneously sent, the left half of the background lights in red and the right half lights in green.

uIris control block

		IRIS
1	EXT	3
		AUTO

2

AEXT (lens extender) indicator

Lights when the lens extender is used.

BIRIS control and display window

When the AUTO button is not lit, you can adjust the iris manually by turning the control. The adjustment value is displayed in f numbers on the display.

When the AUTO button is lit, the reference value for automatic iris adjustment can be set in a range of ±2f with this control.

When the iris is closed, “CL” is displayed in the window.

HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls 110