Sony 930, 950, 900 manual File Structure

6	1. Press [MSU SW Set] on the MSU Configuration
	menu.
	The MSU SW Setting display appears.
		MSU SW Setting			Exit
	PIX/WF	PIX/WF	PIX/WF Control
	Syncro	All Mode	Mode
	ON	ON	Direct	Alter-
				nate
	Screen Saver		Test SW Mode
		Wait
		Time
	ON	5	Saw 3 Step		10 Step
		[min]

Screen saver setting area

Note

The Test SW Mode Setting area is displayed with the MSU-750 only.

2.Press [ON] to set it to inverse video to activate the screen saver.

3.When the screen saver is turned on, set the wait time (in units of minutes) until it activates by pressing f or F.

When the adjustment is completed

Press [Exit] to leave this menu.

6-4.File Structure

The HDC-900 is able to store adjustment data in memory in the form of files. There are six types of files, for different purposes:

(1) Operator File

Stores the items displayed on the viewfinder and switch settings for the camera operator. This file is stored in the Memory Stick media card, yet the video data (paint data) cannot be stored.

(2) Preset Operator File

Stores the standard state of operator file items.

This file is stored in the camera, yet video data (paint data) cannot be stored.

(3) Scene File

Stores the temporary video setting data according to the scene. This file is stored in the camera and Memory Stick media card.

Table 6-1: Structure of Paint Related Files

(4) Reference File

Stores the custom paint data adjusted by the video engineer. This file is stored in the camera and Memory Stick media card.

(5) Lens File

Used for compensation of the deviation which generates by switching the lens extender from OFF to ON and for compensation of the difference in the characteristics between lenses. This file is stored in the camera.

(6) OHB File

Used for adjustment of the CCD block maintenance. This file is stored in the camera.

When STANDARD is executed.

Factory-set value 0

Scene File

Refer to "File Items".

Lens File

When lens extender setting is OFF, Flare R/G/B and V Modulation Shading R/G/B/Master can be stored.

When lens extender setting is ON, White R/B, Flare R/G/B and V Modulation Shading R/G/B/Master can be stored.

Reference File

Refer to "File Items".

OHB File

R/G/B for each White Shading H SAW, H PARA, V SAW, VPARA can be stored.

R/G/B for each Black Shading H SAW, H PARA, V SAW, and

V PARA can be stored.

And OHB matrix and the ND offset can be stored.

Output to hardware*

*The additional data of each file is sent to each circuit on the unit.

HDC-900/950/930 Series Product Information Manual Chapter 6 A Quick Lesson on Camera Settings 75