Sony 900, 930, 950 manual Power switch, INCOM1 and 2 controls and switches

7 7-2-4Back Right Side

Shoulder strap fitting

3 RET 1 button

4 RET button and select switch

5 INCOM1/2 contro and switches

6 CALL button

1 Memory stick section

2 POWER switch

aMemory Stick media card section

A slot to accommodate a Memory Stick media card and an eject button to remove the stick are provided behind the panel. The eject button lights in red while writing or reading data to/from a Memory Stick media card.

Note

Do not insert/remove the memory stick when the eject button lights.

bPOWER switch

CCU: Power supply will be received from the camera control unit.

EXT: Power supply will be received through the DC IN or VTR connector.

cRET 1 (return video 1) button

The return video 1 signal from the camera control unit is monitored on the viewfinder screen while this button is pressed.

dRET (return video) button and select switch When other return video systems are used in addition to return video 1, you can monitor the signal (return video 2, 3, or 4) selected using the selector on the viewfinder screen while pressing the button.

Note

The RET 1 button has priority over the RET button if both buttons are pressed.

eINCOM1 and 2 controls and switches

There are a PGM control incorporated with a select switch, a line select switch, a LEVEL/TALK switch, and INCOM control each for intercom lines 1 and 2.

INCOM 1 INCOM 2 (same components as those of INCOM 1)

	PGM	PGM	PGM	PGM
1 PGM control and	1			1
select switch	2			2
PROD			PROD
2 Line select switch		INCOM	INCOM
	ENG			ENG
LEVEL TALK			LEVEL TALK
R	ON		R	ON
3 LEVEL/TALK switch		1	2
F	OFF	INCOM	INCOM F	OFF

4INCOM control

HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls 86