Sony 950, 930, 900 1-1BNC connector 75 Ohms, 1-2RS232C-1/2/3*19P, Female, 1-3REMOTE 8P, Female

8	B-Y/B OUT
	R-Y/R OUT
	VBS OUT
	Connector	Connector/cable
	HKCU-953
	FRAME REFERENCE IN
	FRAME REFERENCE OUT
	HDCU-950	1-569-370-12 PLUG, BNC or
	RET IN (1-3)	BELDEN8281 Cable or
	SERIAL OUTPUT (1-2,
	MONI)	equivalent
	SD SDI OUT (1-3)

HKCU-953

HD SDI OUT (1-2)

MIC1/MIC2(3-pin, Male)1-508-083-00 XLR 3-pin female or CANNON XLR-3- 11C equivalent

MIC REMOTE (WF

REMTOE) (D-sub

15-pin, Female) 1-506-582-11 D-sub 15-pin, male or JAE DA-CI-J10 equivalent

INTERCOM/TALLY/

PGM (D-sub 25-pin,

Female)D-sub 25-pin, male

JAE DA-25PF-N equivalent

WF MODE (4-pin,

Female)1-560-155-00 PLUG, 4-pin male (supplied)

RCP/CNU (8-pin,

Female)1-766-848-11 PLUG, 8-pin male or CCA cable assembly (optional)

CCA-5-30 (30 m), CCA-5-10 (10 m), CCA-5-3 (3 m)

INTERCOM (5-pin,

Female)1-508-370-11 XLR 5-pin, male or CANNON XLR-5-12C equivalent

8-4.CNU-700, Camera Command Network Unit

8-4-1Connector Input/Output Signals

Main connector input and output signals are as follows.

8-4-1-1BNC connector 75 Ohms

[Input Signal]

REFERENCE	300 mV p-p, loop through
[Output Signal]
CHARACTER	700 mV p-p,
	300 mV p-p (SYNC)

8-4-1-2RS232C-1/2/3*1(9P, Female)

51

9 6

(External view)

RS232C

No.	Signal	Specifications
9	NC	—

*1 The RS-232C-3 port can be used only when the BKP-7930 is installed.

*2 The RS-232C-2 and RS-232C-3 ports can be used for RS- 422 interfaceing by changing the switch setting of S802 to S806 on the IF-777 board.

8-4-1-3REMOTE (8P, Female)

RCP/CCU/MSU/VCS

AUX 1/2/3/4

2 1 7

3 8 6

4 5

(External view)

No.	Signal	Specifications
1	DCD IN	DATA CARRIER DETECT
2	RXD IN	RECEIVED DATA
3	TXD OUT	TRANSMITTED DATA
4	DTR OUT	DATA TERMINAL READY
5	SIGNAL GND	SIGNAL GND
6	DSR IN	DATA SET READY
7	RTS OUT	REQUEST TO SEND
8	CTS IN	CLEAR TO SEND
9	NC	—
RS422*2

No.	Signal	Specifications
1	DCD IN	DATA CARRIER DETECT
2	RXD IN	RECEIVED DATA
3	TXD (+) OUT	TRANSMITTED DATA
4	TXD (-) OUT	TRANSMITTED DATA
5	SIGNAL GND	SIGNAL GND
6	RXD (-) IN	RECEIVED DATA
7	RTS OUT	REQUEST TO SEND
8	CTS IN	CLEAR TO SEND

No.	Signal	Specifications
1	TX (+)	CNU SERIAL DATA
2	TX (–)
3	RX (+)	MSU/RCP/CCU/VCS/AUX
		SERIAL DATA
4	RX (–)
5	TX GND	GND for TX
6	POWER (+)	*3
7	POWER (–)	*3
8	SPARE
	CHASSIS GND	CHASSIS GND

*3

CCU1 to CCU6 CONNECTOR 6PIN . . POWER (+) IN 7PIN . . POWER (–) IN

RCP1 to RCP6, AUX1, AUX2, MSU

6PIN . . POWER (+) OUT (RCP POWER +25 V) 7PIN . . POWER (-–) OUT (GND for Power)

VCS CONNECTOR

6PIN . . NOT USED

7PIN . . NOT USED

HDC-900/950/930 Series Product Information Manual Chapter 8 Connectors and Cables 160