Sony 950, 930 Display window block, ECS/SHUTTER Gamma Master ND CC, ND filter Examples 1 Clear

7	l Display window block
	1	2	3	4

ECS/SHUTTER GAMMA MASTER ND CC

GAIN FILTER

AECS frequency/Shutter speed display window The currently selected ECS frequency or step shutter speed is displayed in the window.

Switching between the ECS mode and shutter mode is made using the Function menu. When

both ECS and Shutter are off, “OFF” is displayed.

BGAMMA display window

The currently selected step gamma value is displayed in the window. The setting is made

using the Function menu. The higher the gamma effect, the lower the value.

CMASTER GAIN display window

The selected gain value (dB) of the camera is displayed in the window. The setting is made using the Function menu.

DFilter display window

The currently selected ND and CC filters are displayed. Filter selection is made using the Function menu.

ND filter (Examples) 1: Clear

2: 1/4 ND

3: 1/8 ND

4: 1/16 ND

5: 1/64 ND

CCfilter (Examples) A: Cross filter

B: 3200K (clear)

C: 4300K

D: 6300K

E: 8000K

mIC card insertion block

ACCESS

IC MEMORY CARD

12 3

AACCESS indicator

Shows the status of the IC memory card.

Indication	Meaning or Measures
Off	No card is inserted.
Lit in	There is a card in the slot. (The battery
green	condition is good.)
	The battery of the card in the slot begins
Lit in	losing its charge. Although the data are
orange	still maintained, replace the battery at the
	earliest opportunity.
	The battery of the card in the slot is
	almost exhausted. While the card stays
Flashes in	in the MSU-750, the MSU-750 supplies
orange	the power to the card. However when the
	card is ejected, the data cannot be main-
	tained. Replace the battery before using.
	Data are being read/written. If you eject
Lit in red	the disc in this condition, the data is not
	guaranteed. All the data may be lost.

For battery replacement, refer to the instructions for the IC card.

BIC card slot

Insert an IC card (which conforms to PCMCIA) to store reference files and scene files of the video camera or CCU (SRAM CARD ONLY). When the card is correctly set, the ACCESS indicator lights in green.

Note

The data in the memory card is maintained by the battery built into the card. If the battery is exhausted, the data in the card will be lost. You can check the battery condition by the ACCESS

indicator. If the battery becomes weak, replace the battery with a new one as soon as possible.

CEject button

Press to eject the inserted IC card.

Note

Do not eject a card when the ACCESS indicator is lit in red (it means that the data is being read from or written to the card). This may erase data stored in the card.

HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls 115