Sony 900, 930 17.CA-905L, Large Lens Adaptor, 17-1Lens Attachment Section Front and Connectors

7 7-17.CA-905L, Large Lens Adaptor

7-17-1Lens Attachment Section

(Front) and Connectors

BKP-9057 Viewfinder

Saddle (not supplied)

qa Lens connector

q; REMOTE cable

9 CA cable

8 Accessory bracket

7 Number plate holder

5 Lens mode switch

6 CCU connector

Lens mouth

1Lens lock

2Lens lock holding knob

3Lens connector

4Cable Clamp

aLens lock

Secures the lens by the tongue-like protrusion at the lens bottom.

bLens lock holding knob

Secures the lens lock. Turn clockwise to tighten, and counterclockwise to loosen.

cLens connector (36-pin) Connect to the connector on the lens.

dCable clamp

Secures the camera cable. The diameter of the cable with a diameter of 8 to 15 mm should be used with the cable clamp.

eLens mode switch

Selects one of the two lens communication modes. During normal operation, set to NORMAL. During use of a serial communication lens, set to SERIAL.

fCCU (camera control unit) fiber connector: LEMO type

Connects through an optional fiber cable to the CAMERA connector on the CCU.

gNumber plate holder

Fit the supplied number plates.

hAccessory bracket

Attach an optional accessory, such as a BKP-7911/ 7912 Script Holder.

iCA (camera adaptor) cable (fiber connector):

LEMO type

Connect to the CCU connector on the camera adaptor.

jREMOTE cable (8-pin)

Connect to the REMOTE connector on the camera adaptor.

kLens connector (12-pin)

Connect to the LENS connector of the camera.

HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls 140