Sony 930, 950, 900 manual Viewfinder Saddle, 17-3Rear control panel

7	7-17-2Camera-mounting Section (Inner Base) and the Optional BKP-9057
	Viewfinder Saddle

1 VF (viewfinder) connector

	2 Viewfinder mount
	3 Viewfinder release
	button
q; Camera mount	4 Pan-lock lever

9 Camera mount release lever

5 VF connecting cable

8 Camera mount slide lever

7 Number plate holder

6 Saddle lock knob

aVF (viewfinder) connector

Connect to the camera connector on a viewfinder.

bViewfinder mount Attach the viewfinder.

cViewfinder release button

Push this button to disengage the viewfinder

dPan-lock lever

Turn counterclockwise to tighten the viewfinder. Turn clockwise to loosen the viewfinder.

eVF connecting cable (supplied with the BKP-

9057) (20-pin)

Connects to the VF connector (20-pin) on the camera.

fSaddle lock knob

Locks the saddle so it does not topple down. Turn counterclockwise to tighten the saddle, or clockwise to loosen it.

gNumber plate holder

Fit the supplied number plates.

hCamera mount slide lever

Pull this lever to slide the camera mount forward and backward.

iCamera mount release lever

To remove the camera from the unit, push this lever while pushing the safety lever (on the left) rightward.

jCamera mount

Fit the camera. Slide to the front and rear.

7-17-3Rear control panel

CA-905L (during use with the HDC-950/930 only) with rear-panel sticker attached

POWER		R		G	B		RET	RET 1
FILTER LOCAL		2	3 4	H-POSI	V-POSI
		1	5
		ND
		B	C D	WIDTH	HEIGHT	STORE		CORSOR
		A	E
							1	2	3	ON
		CC
CENTER	SAFETY	VF	UP	SCREEN				VF DETAIL
MARKER	ZONE	SCAN	TALLY	SIZE	DISPLAY	MENU SELECT
ON	ON	16:9	ON	MARKER	ON			ON		3 Assignable
				ON	OFF
OFF	OFF	4:3	OFF	OFF	MENU CANCEL ENTER		OFF

switch

2 SCREEN SIZE MARKER switch

1 VF SCAN switch

aVF SCAN (viewfinder scan) switch

Selects the aspect ratio of the viewfinder screen. 16:9: 16:9 aspect ratio

4:3: 4:3 aspect ratio

bSCREEN SIZE MARKER switch

Selects the screen size marker on the viewfinder screen.

ON ( ): Display area is bounded by two dark margins.

ON( ): Display area is bounded by two white lines.

OFF: No marker is displayed.

cAssignable switch

Afunction specified by menu setting on the HDC-950/ 930 can be assigned to this switch.

HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls 141