Sony 930, 950 Rack Mounting of System Equipment, Inch size equipment, When a 1U unit is mounted

2 2-8.Rack Mounting of System Equipment

19-inch size equipment

The HDCU-900 Camera Control Unit, CNU-700 and CNU-500 Camera Command Network Units, and VCS-

700Video Selector can be mounted in a 19-inch standard EIA rack. These units either mount directly into the rack or with optional slide rails such as the Sony RMM-30 Rack Mount Rail. These slide rails allow the unit to be easily pulled out from the rack and are recommended if you intended to pull out the unit frequently.

Warning for Safety Purpose: It takes two or more people to mount a unit into a rack. Mounting the unit into a rack by yourself can cause back or other injuries.

2.Secure the inner members to both sides of the unit with the screws (+B4 x 8). Use the screws removed from or supplied with the unit.

Mounting the unit directly to the rack

Fix the unit to the rack using the rack mount bracket of the unit. Daily maintenance is easy with the unit mounted with this method.

Universal-type rack

12.7

15.9

15.9

12.7

Wide-type rack

12.7

12.7

Mounting the unit using the RMM-30 Rack Mount Rail

When the RMM-30 Rack Mount Rail is used, the unit can be mounted into a rack with a depth of 660 to 830 mm (26 to 32 3/4 inches). Proceed as follows:

1.Pull out inner member while pushing against the stopper.

3.Loosen the screw of the bracket of the outer member.

4.Attach the front and rear brackets of the outer member to the rack. Screws (b), (c) and (d) are supplied with the RMM-30.

Plate nut	c
Front	Rear

12.7

15.9

15.9

12.7

15.9

15.9

Screw b

31.75

Screw d

Front Rear

12.7

31.75

12.7

31.75

Screw	d	31.75
		Screw	d

	When a 1U unit is mounted
Stopper	(1)	Attach the front bracket to the inside of the front
	Outer member	of the rack at the screw holes at 15.9 mm (22/
Inner member		32 inch) intervals, using screw (b) and plate nut
		(c).
	(2)	Attach the rear bracket to the outside of the rear
		of the rack at the screw holes at 31.75 mm (1 5/
		16 inches) intervals, using screws (d).
	When a unit other than 1U height is mounted
	(1)	Attach the front bracket to the outside of the
		front of the rack at the screw holes at 31.75 mm
		intervals, using screws (d).

HDC-900/950/930 Series Product Information Manual Chapter 2 Total System 39