Sony 930, 950, 900 manual So that it goes dark, Level Start White, Break, Detail knob

7	C CLOSE button
	Press and light the button to close the iris. To
	release the close mode, press the button again
	so that it goes dark.
	k AUTO SETUP block
	1	2	3	4
		AUTO SETUP
	SKIN DTL	LEVEL START/	WHITE	BLACK
	AUTO HUE	BREAK

AAuto adjustment item select buttons

Press and light up these buttons to select the items to be automatically adjusted.

SKIN DTL AUTO HUE: Skin tone detail automatic hue.

LEVEL: Gamma balance, knee point, master black level, etc.

BSTART/BREAK button

Press to start automatic adjustment of the selected items. The button lights during adjustment and goes dark when adjustment is

1

completed. If you press the button when lit, the automatic adjustment is canceled and the button flashes. To stop the flashing, press the button again.

CWHITE (white balance) button

Press to automatically adjust the white balance. The button lights during adjustment and goes dark when adjustment is completed. If you press this button when lit or the START/BREAK button, the automatic adjustment is canceled and the

button flashes. To stop the flashing, press the button again.

DBLACK (black balance) button

Press to automatically adjust the black balance and black set. The button lights during adjustment and goes dark when adjustment is completed. If you press this button when lit or the START/BREAK button, the automatic adjustment is canceled and the button flashes. To stop the flashing, press the button again.

Note

If an error occurs during adjustment, the pressed button flashes.

lMenu operation block

PAINT 1 PAINT 2 PAINT 3 SCENE MAINTE	FUNCTION
NANCE

2

3

AMODE (mode select) buttons

Select the menu mode. If you press and light one of these buttons, the menu for the selected mode appears on the LCD.

PAINT 1/2/3: Each selects the Paint menu to adjust various paint items, such as white, black, and flare.

SCENE: Selects the File operation menu to register and retrieve scene files.

MAINTENANCE: Selects the Maintenance menu to set the H and SC phases of CCU/ HDCU and operational conditions of this control panel.

FUNCTION: Selects the Function menu to control various camera and CCU/HDCU

functions. When none of the buttons are lit, the status display is obtained.

BLCD/touch panel

Normally displays the statuses. When you press a MODE button, the corresponding menu is displayed to permit you to adjust the displayed items.

CControl knobs (rotary encoders)

Adjust the selected items on the touch panel.

mDETAIL knob

Used to adjust the detail level. You may select HD detail or SD detail using the Maintenance menu.

nMEMORY STICK media card slot and access lamp

Insert a Memory Stick media card to store setting data, such as reference files and scene files of the video camera or CCU/HDCU.

The access lamp shows the status of the Memory Stick media card.

Off: No Memory Stick media card is inserted.

Lit in green: There is a Memory Stick media card in the slot. In this condition, you can safely eject the Memory Stick media card.

Lit in red: Data are being read/written. If you eject the Memory Stick media card in this condition, the data are not guaranteed. All the data may be lost.

HDC-900/950/930 Series Product Information Manual Chapter 7 Location and Function of Parts and Controls 120