Rear Panel, Description | SOYO AVRO3001 instruction

2.2 Rear Panel

The rear panel contains the following items:

Item

Power

Reset

Modem

LAN 1 to 4

Phone

Figure 2-2

Connect to the power adapter

Press this button for more than 5 seconds to reset and restore the default factory settings

Connect your cable/DSL modem to this port with an Ethernet Cable

Fast Ethernet port (RJ-45). Connect devices on your local area network to this port (i.e., a PC, hub, or switch) with an Ethernet Cable

Connect your telephone to this port

Image 6

Contents

Page Table of Content Tools StatusGlossary Compliances Introduction Product Overview Hardware Description Front Panel Rear Panel Description Default Network Setup Default ValuesPassword Other Default settings Login Avro 3001 VoIP router Page System Configure Avro 3001 VoIP routerPassword Settings Time Zone Remote Management WAN Settings Dynamic IP PPPoE PPP over Ethernet Static IP LAN Settings 4 DNS NAT Settings Address Mapping Virtual Server Special Applications Access Control Firewall Normal Filtering Table MAC Filtering Table URL Blocking Schedule RulePage Intrusion Detection Functions 5 DMZ UPnP Universal Plug and Play Ddns Configuration Tools ResetTools Page Status Internet Connection Device Status Security Log Dhcp Client Log VoIP StatusPage Glossary Ethernet Dynamic IPDynamic Routing File Transfer Protocol FTP Lite Internet Service Provider ISPGatekeeper 245 Local Area Network LAN Media Access Control MACInternet Protocol Security IPSec MAC Address Ping Password Authentication Protocol PAPNetwork Address Port Translation Napt Point-to-Point Protocol over Ethernet PPPoE Routing Quality of Service QoSRouter Routing Information Protocol RIP Virtual Server Universal Plug and Play UPnPVirtual Host Voice over Internet Protocol VoIP Compliances Industry Canada Class BFederal Communication Commission Interference Statement