SOYO SY-6VZA Enable/Disable Power-On by Keyboard JP1, Power Button Enable JP8, JP8 Setting

SY-6VZAQuick Start Guide

Step 6. Enable/Disable Power-On by Keyboard (JP1)

You can choose to enable the Power-On by Keyboard function by shorting pin 2-3 on jumper JP1; otherwise, short pin 1-2 to disable this function.

Power-On by	Disable		Enable
Keyboard
JP1 Setting	Short pin 1-2 to the disable		Short pin 2-3 to enable the	3
		3
		2		2
	Power-On by Keyboard		Power-On by Keyboard
	function.	1	function	1

Important: When using the Power-On by Keyboard function, please make sure the ATX power supply can take at least 720mAmp load on the 5V Standby lead (5VSB) to meet the standard ATX specification.

Step 7. Power Button Enable (JP8)

Your system can be power on by either pressing a power button or typing in a password, which can be set in the BIOS SOYO COMBO Setup. To avoid being unable to power up the system due to of forgetting the password, you can place a jumper cap to short JP8. This will always enable the Power Button.

Power Button	Power Button always	Power Button according to
Enable	enabled	BIOS setting
JP8 Setting	Short pin to always	Open pin for a Power
	enable the Power	Button function
	Button.	according to the BIOS
		setting.

Hardware Installation

Step 8. External Suspend Button (JP2)

Some cases come with a suspend button, insert the plug into JP2. In addition to through this button, the system can also enter the suspend mode through your OS.

Note: Suspend mode only functions if your Power Management mode is APM. Make sure that the BIOS setting for Power Management is APM. Windows 98 can be installed with ACPI Power Management (default is APM), in this case suspend mode will not function either.

9