SOYO sy-7isa+ CPU Cooling Fan Cpufan Pin Assignment, Cooling Fan Installation CPU Cooling Fan

Hardware Installation SY-7ISA+

5.Cooling Fan Installation

(1) CPU Cooling Fan

After you have seated the CPU properly on the processor, attach the 3-pin fan cable to the CPUFAN connector on the Motherboard. The fan will stop when the system enters into Suspend Mode. (Suspend mode can be enabled from the BIOS Setup Utility, [Soyo Combo] menu.)

To avoid damage to the system, install according to the following pin assignment:

CPU Cooling Fan

CPUFAN Pin Assignment

GND 1

12V 2

SENSOR 3

36