SOYO SY-K7VEMPRO 2-3.7 Quick BIOS Setup

Hardwa re Insta llation SY-K7VEMPRO
43
2-3.7 Quick BIOS Setup
After the hardware installation is complete, turn the power switch on, then
press the <DEL> key during the system diagnostic checks to enter the
Award BIOS Setup program. The CMOS SETUP UTILITY will display
on screen. Follow these steps to configure the CPU settings.
Step 1. Select [STANDARD CMOS Features]
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to
“Auto”.
Step 2. Select [LOAD Optimized DEFAULTS]
Select the “LOAD Optimized DEFAULTS” menu and type “Y” at the
prompt to load the BIOS optimal setup.
Step 3. Select [SAVE & EXIT SETUP]
Press <Enter> to save the new configuration to the CMOS memory, and
continue the boot sequence.