BIOS Setup Utility SY-K7VEMPRO
60
After you have completed the changes, press [Esc] and follow the
instructions on your screen to save your settings or exit without saving.
The following table describes each field in the Advanced Chipset Features
Menu and how to configure each parameter.
3-3.1 CHIPSET FEATURES SETUP CHIPSET
FEATURES
Setting Description Note
Enabled Default
DRAM
Timing B y
SPD
Disabled
If enable the DRAM will auto
detect the DRAM timing.
DRAM Clock
133M This item allows you to control the
DRAM speed.
default
SDRAM Cycle
Length
3
2
When synchronous DRAM is
installed, the number of clock
cycles of CAS latency depends on
the DRAM timing. Do not reset
this field from the default value
specified by the system designer.
Default
4 Bank
Disabled Default
Bank
Interleave
2 Bank
Increase DRAM performance.
Disabled
Enabled
Disabled/Enabled PCI Master
Pipeline Req. Default
PCI Master
Pipeline Req
Disabled Default
Memory Hole
15M – 16M Some interface cards will map
their ROM address to this area. If
this occurs, select [Enabled] in this
field.
Disabled Default
P2C/C2P
Concurrency Enabled
This item allows you to
enable/disable the PCI to CPU,
CPU to PCI concurrency