SOYO SY-K7VTA PRO Set CPU jumper CPU Ratio Adjustment Setting RJ1, CPU FSB Setting FJ1,FJ2

SY-K7VTA PRO Quick Start Guide

Step 2. Set CPU jumper

CPU Ratio Adjustment Setting (RJ1)

For certain AMD CPUs, the multiplier is not locked such that setting a ratio/multiplier higher than specified on the CPU is possible. For technical details read the following:

Refer to the following table to set the Frequency Multiplier of your CPU.						Hardware Installation
Frequency Multiplier	J2			J3
Setting
Auto	Short Pin1-2			Short Pin1-2
	1	2	3	1	2	3
Manual	Short Pin2-3			Short Pin2-3
	1	2	3	1	2	3

If you set ratio to manual and configure the RJ1 jumper to the settings that match your CPU speed, as follow table:

RJ1	1	2	3	4	RJ1	1	2	3	4
5	on	off	on	on	9	off	off	on	on
5.5	on	off	on	off	9.5	off	off	on	off
6	on	off	off	on	10	off	off	off	on
6.5	on	off	off	off	10.5	off	off	off	off
7	off	on	on	on	11	on	on	on	on
7.5	off	on	on	off	11.5	on	on	on	off
8	off	on	off	on	12	on	on	off	on
8.5	off	on	off	off	12.5	on	on	off	off

Note: SOYO does not guarantee system stability if the user over clocks the system. Any malfunctions due to over-clocking are not covered by the warranty.

CPU FSB Setting (FJ1,FJ2)

The FSB Frequency can also be set through jumpers FJ1 and FJ2 and it may therefore differ from the Frequency the CPU specifies. Doing so may however force your CPU to operate out of its specifications and therefore SOYO can not guarantee the proper functioning of your system.

9