If the elevator is still difficult to operate, verify that the valves located on the strut are fully depressed when the trigger is activated.
NOTE: two people are required for this procedure.
Adjust exposed cable length, located next to the trigger (See Step 19) by using the jam hex nuts on the cable end. Slide outer shroud to exposed valves. The valves must be fully depressed so elevator can be adjusted smoothly and fully extended to lock the elevator.
Jam Hex Nuts
Valve |
Trigger released, locking elevator
Valve
Trigger squeezed, unlocking elevator
23 | 10/04 P/N 21166904 |
