Spalding 21166904 manual Contact Utilities Before Digging

1. Ensure ground is level with playing
	surface, then dig pole hole.
	WARNING			PLAYING
				SURFACE
	CONTACT UTILITIES
	BEFORE DIGGING.			24" (61 cm)
				36" (91.4 cm)
				GROUND
				SURFACE
2.	Install nut (2) to J-bolt (1)	2	2”	3	2
	as shown. Repeat	(5.08 cm)
	procedure for other three
	J-bolts (1).
	IMPORTANT!
	Make sure nuts are 2”
	(5.08 cm) from top of J-Bolts.	1
					2
3. Install threaded ends of J-bolts (1) through holes in			1
	mounting plate (3) and secure as shown.
	NOTE: Make sure J-bolts (1) are in the illustrated
	position.
	NOTE: Nuts on the top of plate are used for leveling
	the pole after system is fully assembled.
		3		10/04	P/N 21166904