Spalding M8860411 manual Side View, Build drainage hill

4.
	Fill hole with concrete. Tamp down concrete to release air pockets
	and build drainage hill.

DRAINAGE HILL

1" (2.54cm)

PLAYING SURFACE

	SIDE VIEW
5.	Insert J-bolts (19) from mounting plate (2) into cement as shown. Move assembly around to release
	any air pockets in cement, then rest mounting plate on cement drainage hill. Apply some pressure to

level mounting plate on top of drainage hill. Level mounting plate and square with playing surface. Clean off any excess cement on mounting plate at this time and place washers (24).

IMPORTANT!

Check leveling of mounting plate several times with carpenter’s level while concrete is curing.

IMPORTANT!
Front of mounting plate
(2) must be parallel with	PLAYING SURFACE
playing surface.

24

24

24

2

24

IMPORTANT!: WAIT A MINIMUM OF 72 HOURS BEFORE GOING ON

TO NEXT STEP. CONCRETE MUST CURE. ALLOW ADDITIONAL TIME

FOR COLD, WET OR HUMID WEATHER.

ID# M855441 06/05 6