5. | Insert ground tube assembly (2) into cement as shown. Move assembly around to release any air | |
pockets in cement, then rest mounting plate on cement drainage hill. Apply some pressure to level | ||
| ||
| mounting plate on top of drainage hill. Level mounting plate and square with playing surface. Clean off | |
| any excess cement on mounting plate at this time and place washers (24) on mounting bolts (19). |
IMPORTANT!
NOTE ORIENTATION
Front of mounting plate (2) must be parallel with playing surface.
PLAYING SURFACE
IMPORTANT!
Check leveling of mounting plate several times with carpenter’s level while concrete is curing.
2
10
10
10
24 | 24 |
| |
| 24 |
24
PLAYING SURFACE 
IMPORTANT!: WAIT A MINIMUM OF 72 HOURS BEFORE GOING ON
TO NEXT STEP. CONCRETE MUST CURE. ALLOW ADDITIONAL TIME
FOR COLD, WET OR HUMID WEATHER.
7 | 08/06 | ID# M88604C1 |
