17. | After pole has been secured to the anchor plate (2) loosen nut (26), |
| remove cotter pin (9), and pull out pin (8). This will allow the removal |
of the assembly rod (14) which is no longer necessary for the remainder of the assembly and installation of system.
WARNING!
ONLY AFTER THE ANCHOR PLATE HAS BEEN FULLY TIGHTENED: Remove cotter pin (9) and pin (8) to remove threaded assembly rod (14) from anchor plate (2).
26
24
15
14
9
8
25
ID# M88604C1 | 08/06 | 18 |
