Spark Tech WX-6615 manual ICMP, UDP, TCP, or UDP & TCP, Summary

WWW.SparkLAN.com

Access to control your network PCs' access to the Internet. Select Inbound

Traffic to control Internet PCs' access to your local area network.

Note: The screen's settings will vary depending on which Policy Type you select.

4. Select Deny or Allow, depending on how you want to control access for specific PCs.

5. Click the Edit List button next to PCs or Internet PCs.

a. On the List of PCs or List of Internet PCs screen, specify PCs by IP address or MAC address. Enter the appropriate IP addresses into the IP fields. If you have a range of IP addresses to filter, complete the appropriate IP Range fields. Enter the appropriate MAC addresses into the MAC fields.

b. Click the Apply button to save your changes. Click the Cancel button to cancel your unsaved changes. Click the Close button to return to the Internet Filter screen.

6. Set the days when access will be filtered. Keep the default setting, Everyday, or select the appropriate days of the week.

7. Set the time when access will be filtered. Keep the default setting, 24 Hours, or check the box next to From and use the drop-down boxes to designate a specific time period.

	Note: Access for the listed PCs will be controlled during the selected days and
	times. Any blocked services or websites will be blocked at all times.
	8. In the Blocking Services drop-down boxes, select the services you want to block (the default
	setting is	None). In the Blocking Services fields, the range of ports for this service will
	appear. If you want to change the range of ports, enter the new numbers in the Blocking
	Services fields, or edit the service’s settings (see below).
	To add a service or edit a service's settings, follow these instructions:
	a.	Click the Add Service button.
	b.	To create a new service, enter the name of the service in the Service Name
		field. To edit a service's settings, select the service from the box on the right of
		the screen.
	c.	From the Protocol drop-down menu, select the protocol type for this service:
		ICMP, UDP, TCP, or UDP & TCP.
	d.	In the Port Range fields, enter the range of ports for this service.
	e.	To add a service, click the Add button. To edit the settings for a service, click
		the Modify button.
	f.	To delete a service, select the service from the box on the right of the screen.
		Click the Delete button.
	g.	Click the Apply button to save your changes. Click the Cancel button to undo
		your changes. Click the Close button to close the Add Service window.
	9. If you want to block websites with specific URL addresses, enter each URL address in a
	Website Blocking by URL Address field. You can enter up to four URL addresses. (This
	feature is not available if you chose Inbound Traffic for the Policy Type.)
	10. If you want to block websites that use specific keywords as part of their URL addresses,
	enter each keyword in a Website Blocking by Keyword field. You can enter up to six
	keywords. (This feature is not available if you chose Inbound Traffic for the Policy Type. )
	11. Click the Apply button to save your settings for an Internet Access Policy. Click the Cancel
	button to cancel your unsaved changes.
	12. To create or edit additional policies, repeat steps 1-11.
Delete	To delete an Internet Access Policy, select the policy's number, and click the Delete button.
Summary	To see a summary of all the policies, click the Summary button. The Internet Policy Summary
	screen will show each policy's number, Name, Type, Days, and Time of Day. To delete a policy,
User’s Guide		23