Spark Tech WX-6615 manual Delete This Entry Click the Delete This Entry button, Show Routing Table

WWW.SparkLAN.com

∙Gateway - This is the IP address of the gateway device that allows for contact between the Router and the network or host.

3.Depending on where the Destination IP Address is located, select LAN & Wireless or Internet (WAN) from the Interface drop-down menu.

4.To save your changes, click the Apply button. To cancel your unsaved changes, click the Cancel button.

For additional static routes, repeat steps 1-4.

To delete a static route entry:

	1.	From the Static Routing drop-down list, select the entry number of the static route.
Delete This Entry	2.	Click the Delete This Entry button.
	3.	To save a deletion, click the	Apply button. To cancel a deletion, click the Cancel
		button.
	Click the Show Routing Table		button to view all of the valid route entries in use. The
	Destination IP address, Subnet Mask, Gateway, and Interface will be displayed for each
	entry. Click the Refresh button to refresh the data displayed.
	∙ Destination LAN IP - The Destination IP Address is the address of the network or host to
	which the static route is assigned.
	∙ Subnet Mask - The Subnet Mask determines which portion of an IP address is the
Show Routing Table	network portion, and which portion is the host portion.

∙Gateway - This is the IP address of the gateway device that allows for contact between the Router and the network or host.

∙Interface - This interface tells you whether the Destination IP Address is on the LAN & Wireless (internal wired and wireless networks), the WAN (Internet), or Loopback (a dummy network in which one PC acts like a network— necessary for certain software programs).

*Click Apply to save your settings.

User’s Guide 28