![](/images/new-backgrounds/1254638/25463813x1.webp)
7. Interval Timer (INT) |
Your Turbo® Comp is |
equipped with an Interval |
Timer. This feature allows |
you to customize your train- |
ing by integrating a pro- |
grammable repeating count- |
down timer into your work- |
out. To enter the interval |
timer mode, press the |
“MODE button” repeatedly |
until “INT” appears Dot |
Matrix Display Area of the |
screen. You are now in |
interval timer mode. To set |
the interval timer, hold the |
“SET” button for three sec- |
onds. The hour digit will |
begin flashing. Press the |
“MODE” Button until the |
desired number appears. |
(Hold down the “Mode” |
button to scroll quickly) Press |
shortest interval that can be set is 5 seconds.
FIGURE 15
10. Distance Countdown |
(DISTÚ) |
Your Turbo® Comp is |
equipped with Distance |
Countdown feature. This |
allows you to set an alarm |
when the selected mileage |
flashing. Press the
“MODE” Button until the desired number appears. (Hold down the “Mode” button to scroll quickly) Press the “SET” button once to set this number and advance to minutes. Repeat this process until minutes and seconds are set to the desired settings. Press the “SET” button to exit pro- gramming mode. Once the time interval timer is programmed, press the “TOP” button to stop and start the Distance Countdown.
Note: The shortest distance that can be set is .01 miles/km.
Average Speed (AVSPD)- The Average Speed is shown on the lower line Digital Display Area up to
99.9M/h (99.9 Km/h) with a resolution of 0.1 M/h (0.1 Km/h)
The average speed is based upon the ATM time. The resolution of the aver- age speed data on the Digital Display Area is shown in 0.1M/h or Km/h increments. (See figure 16)
the “SET” button once to set |
this number and advance to |
minutes. Repeat this process |
until minutes and seconds |
are set to the desired set- |
tings. Press the “SET” but- |
ton to exit programming |
mode. Once the time inter- |
val timer is programmed, |
press the “TOP” button to |
start/stop the countdown. |
(See figure 15). Note: The |
12
is reached. To enter the |
Distance Countdown mode, |
press the “MODE” button |
repeatedly until “DISTÚ” |
appears in the |
Display Area. Note: if your |
display says “INT, press the |
“SET” button to change to |
“DISTÚ” To set the Distance |
Countdown, hold the “SET” |
button for three seconds. |
The hour digit will begin |
COMPUTER
FUNCTIONS
Speedometer (SPEED)- Your current speed is always dis- played in large digits on the top line of the LCD screen.
The speed is displayed up to 99.9 M/h (99.9 Km/h) with a resolution of 0.1 M/h (0.1 Km/h)
FIGURE 16
Maximum Speed (MXSPD)- The Maximum Speed is shown on the lower line of the Digital Display Area up to 99.9 M/h (99.9 Km/h) with a resolution of 0.1 M/h (0.1 Km/h) The max-
13