Specialized Comp manual Auto Start/Stop Timer ATM, Troubleshooting

imum speed is retained in memory and updated when a higher speed is maintained for three sec- onds. The maximum speed can be reset by pressing the “SET” button for three seconds. (See figure 17)

FIGURE 17

Auto Start/Stop Timer (ATM)-

In ATM mode the timer function records the actual time spent riding. It oper- ates only when there is speed input and is dis- played In the Digital Display Area of the screen

Timer Mode (TIMER)-

In TIMER mode the stop-

14

watch function will operate when the “TOP” button is pressed. The stopwatch will record the total time after the button is pressed regardless of whether there is speed input or not.

Interval Timer (INT)- The interval timer is dis- played on the lower line of the screen when (INT) appears on the left. The timer indicates the end of an interval with one short beep per second for the last 4 seconds of the interval. This is followed by a long beep, indicating the begin- ning of a new interval.

Trip Distance (DST)- Trip distance mode will record up to 999.99 miles or kilometers and then roll to zero. The trip distance can be reset by pressing the “SET” button for three seconds. The resolution is

0.01miles (0.01 Kilometers). The trip dis- tance is shown on the lower line if the screen.

(See figure19)

FIGURE 19

Odometer (ODO)-

The odometer will record the total distance traveled up to 99,999 miles or kilo- meters and then roll to zero. The odometer can be reset by pressing the “SET” button for three seconds. The total distance is shown on the lower line if the screen.

Programmable Odometer- The odometer digits are programmable. This is con- venient for transferring your hard-earned mileage that is usually lost when changing batteries or com- puters.

Clock-

Your Turbo® Comp is equipped with a digital clock. The clock can be set to operate in either 12 or 24-hour mode.

Second Wheel Option- For riders who own more than one bicycle or who frequently change tires, the Turbo® Comp is capable of storing two tire sizes. You can change between the two sizes by entering Distance Mode and select- ing TRIP. Then, press the “MODE” button for three seconds. The second wheel mode indicator will change from 1 to 2. Mileage recorded will be cumulative between the two sizes. (An accessory handlebar mount is available from your Specialized dealer. P/N 4814-5045)

TROUBLESHOOTING:

Display is blank: Change the battery or press the AC button on the bottom of the case

15