ENDURO SX FRAME SPECIFICATIONS
1*Top Tube Length
2 **Standover Hgt
3 Head Tube Length
4 Head Tube Angle (Steep)
4 Head Tube Angle (Slack)
5 Seat Tube Angle (Steep)
5 Seat Tube Angle (Slack)
6 BB Height (High)
6 BB Height (Low)
7 Chainstay Length
Short (mm)
551
711
100
69º
68º
67.5º
66.5º
318
307
424
Short (in)
21.7”
28.0”
3.94”
69º
68º
67.5º
66.5º
12.5”
12.1”
16.7”
Long (mm)
584
711
110
69º
68º
67.5º
66.5º
318
307
424
Long (in)
23.0”
28.0”
4.33”
69º
68º
67.5º
66.5º
12.5”
12.1”
16.7”
*TT length is the Horizontal Measurement from the
Headset: 1 1/8” | NOTE: Using travel chips limits the stroke and travel of the shock. A shorter stroke/travel | |
Seatpost diameter: 30.9mm | requires a stiffer spring to compensate so that the shock doesn’t bottom out. The Enduro SX | |
Front derailleur clamp: 34.9mm | comes stock with 2 travel chips, which provides 3.5” travel. | |
Rear hub spacing: 135mm |
| |
BB shell: 68mm | NOTE: Spring weights listed above are to be used as an adjustment starting point only. Rider | |
Seat Collar: 34.9mm | weight and riding style may require a different spring rate than the stock spring rate. Replace | |
Stroke (Short travel): 31.75mm (1.25”)* | the spring accordingly. Refer to your shock manufacturer’s manual for additional shock setup | |
Travel (Short): 3.5” | information. | |
Stroke (Medium travel): 38.1mm (1.5”)* |
| |
Travel (Medium): 4.0” | 2 travel chips: Stock spring. | |
Stroke (Long travel): 44.45mm (1.75”)* | 1 travel chip: Stock spring, or test with 50lb lighter spring if exceeding spring preload range. | |
Travel (Long): 4.5” | 0 travel chips: Test with 50 lb lighter spring. | |
* Stroke can be changed by adding or removing “Travel Chips” | ||
SIZE | SPRING RATE | |
Short | 650lb spring |
|
Long | 750lb spring |
|
14
