Operating your camera – COLOR/SYNC
(2) COLOR : You can choose color and B/W mode electronically.
①Press the SET button to display the setup menu and move the arrow indicator to ‘COLOR’ using the UP and DOWN button.
②SET ‘COLOR’ to the desired mode using the LEFT or RIGHT button.
▶COLOR : The camera will always display a color picture
▶AUTO : The camera will switch into the B/W mode under low light conditions.
Notes
●OSD Key may not work for 3 seconds when the COLOR/BW mode is changed.
(3)SYNC : Two SYNCHRONIZATION modes are available INTERNAL and
EXTERNAL LINE-LOCK.
①Press the SET button to display the setup menu and move the arrow indicator to ‘SYNC’ using the UP and DOWN button.
②SET to the desired mode using the LEFT or RIGHT button.
▶INT : Internal synchronization
▶L/L : If you choose ‘L/L’, you can adjust the desired phase.
Notes 
●When it used in AC power, L/L mode can be used. ●In 12V DC, the SYNC menu defaults to ‘Internal.
25 |
|
|
|
|
|
| 26 | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
