| 1. | |
| 3. INDOOR2: Select the indoor white balance profile | |
| 2. | |
| 4. OUTDOOR1: Select the outdoor white balance | |
| profile 1. | |
| 5. OUTDOOR2: Select the outdoor white balance | |
| profile 2 | |
| 6. HOLD CURRENT: Select this to let the IP | |
| camera automatically obtain a best white balance | |
| setting according to current environment. The IP | |
| camera will use this setting to adjust color. | |
| NOTE: This setting will be lost after you | |
| reboot the camera. | |
| 7. MANUAL: Select this to enable manual setting of | |
| the white balance. You will need to enter the R | |
| Gain and B gain setting below. | |
R Gain | Add or decrease redness to the video when under Manual | |
(Manual White balance | White Balance mode. (This function is only available in | |
mode only) | Manual White balance mode.) | |
| ||
B Gain | Add or decrease blueness to the video when under | |
(Manual White balance | Manual White Balance mode. (This function is only | |
mode only) | available in Manual White balance mode.) | |
| ||
| Select exposure mode to auto or manual. | |
| - Auto: The IP camera will adjust the exposure | |
Exposure mode | automatically. | |
- Manual: (In Manual White balance mode only) | ||
| ||
| Manually select the Exposure Gain and Shutter | |
| Speed below. | |
Exposure Gain | Select the exposure Gain of the IP camera. The higher the | |
value = brighter images. | ||
| ||
| Increase or decrease the shutter speed. The closer the | |
Shutter Speed | number is to 1, the better nighttime performance is, | |
| although this also causes motion blur to the video. | |
AGC Gain | When exposure mode is auto, IP camera will adjust its | |
(In auto Exposure | shutter speed according to AGC gain and the Maximum | |
mode only) | auto shutter speed. Higher AGC gain = brighter images. | |
| ||
Maximum Auto | When exposure mode is auto, IP camera will adjust its | |
Shutter Speed | shutter speed according to AGC gain and the Maximum | |
(In auto Exposure | auto shutter speed. This setting is to set the maximum | |
mode only) | shutter speed range of this camera. | |
| ||
Flickless Mode | Change settings between 60Hz or 50Hz, depending on | |
the AC power type of your region. | ||
|
STEP 2: Click the [Apply] button of each setting to confirm the
settings or click the [Reset] button to