OSD DISPLAY
CAMERA ID : OFF
PRESET ID : OFFDEFAULT SETTING
SECTOR ID : OFF
COORDINATE: ON [PREVIOUS PAGE]
A-8-4. DOME SET – [NEXT PAGE] – [SYSTEM STATUS]
This page shows the information of this camera.
SYSTEM STATUS
PROTOCOL : PELCO D, P
BAUD RATE : 2400 BPS
FIRMWARE VER. : 2.00DEFAULT SETTING
UPGRADED DATE : 06.07,22
CAMERA MODULE : SDM100
[PREVIOUS PAGE]
-Protocol and baud rate are shown according to the dip switch setting (Refer to page 29, 30 and 31)
-Firmware version and upgraded date will be changed if upgraded.
-Below camera modules can be set as follows.
SDM100 : SAMSUNG 10X ZOOM CAMERA MODULE.
EN300 : OPTICAL 3X MODULE (PAN FOCUS) : Board Camera ( with Fixed Lens)
A-8-5. DOME SET – [NEXT PAGE] – [INITIALIZATION]
To clear all memorized data for tour, preset, sector, privacy or pattern, move five keys to the right direction when the cursor is on
[INITIALIZATION]
