Chapter 4. Using the Library
37
Inserting and Removing Data Cartridges
The relationship of the data cartridges and the DCM is shown in Figure 4-5. When
inserting and removing AIT data cartridges, the cartridges should be handled as
follows:
• The cartridge is inserted in the DCM with the cartridge window facing the top of
the magazine. Correctly installed, the data cartridge snaps into the tape slot.
• The cartridge is removed when grasped and pulled straight out of the DCM.
Top of the AIT
cartridge, indicated
by the clear plastic
window
Top of the DCM
Bottom of the DCM
Figure 4-5 An AIT cartridge, left, and a DCM containing multiple AIT cartridges.
Holes to left
Cartridge door
Bar code label