5. Set WASH/RINSE temperatures.
FLW2071N
There are four or five WASH/RINSE temperatures available – Boosted Hot Wash/Cold Rinse (select models only), Hot Wash/Cold Rinse, Warm Wash/ Warm Rinse, Warm Wash/Cold Rinse, Cold Wash/ Cold Rinse.
The Energy Saver settings, marked with an asterisk (*) on some models, show which temperature settings will use the least energy.
Refer to the Water Temperature section for the temperature that works best for your garments.
WA R N I N G
Window may be hot in the Boosted Hot and Hot wash cycles.
W325
6. Select EXTRA RINSE if desired.
TLW2000N
The extra rinse control is useful for detergent sensitive skin. By pressing the EXTRA RINSE to ON, the REGULAR, PERMANENT PRESS, and HANDWASH/DELICATE cycles will each provide an additional rinse. If the rinse is desired, press the switch to ON. When the extra rinse is not wanted, OFF should be selected.
7.Select the cycle according to the type of fabric being washed. Use the indicator dot on the cycle selector knob as a guide.
8.Press and hold the START button for two seconds to start the washer. The DOOR light will come on after a short delay, water fill will begin, and wash drum will begin tumbling.
NOTE: Washer door MUST be closed tightly to start washer.
If items need to be added or removed after a cycle has started, turn the cycle selector knob to the OFF position. Wait until the DOOR light goes off (approximately 45 seconds after cycle has been stopped), open door, add or remove items, and start the cycle again.
There is no agitator on this washer. Instead, the clothing gently tumbles through the water. The wash action consists of a period of tumbling in one direction, a brief pause, and then a reverse tumble in the opposite direction. The pauses are part of the tumble action and add to the unique cleaning capabilities of the washer. They are part of the cycle.
NOTE: There will be extended pauses when Boosted Hot Wash, if available, is selected because the water is being heated.
802759