GENERAL MAINTENANCE
The elliptical is practically maintenance free. Just keep it clean by wiping down the unit with a damp cloth after each use. Do not use harsh detergents. Every month check that all the hardware is securely tightened. Do not use the elliptical if any parts are loose or broken.
The wheels and aluminum tracks will need to be kept clean to prevent noise and maintain smoothness. No lubrication should be necessary but if persistent noises from the wheels develop you can use a small amount of lubricant. Natural lubricants work well such as vegetable oil or soy based lubrication products like Biokleen from Ecoviva:
MANGEMENT MODE
To enter the management mode press the START/STOP key until the console resets. During the reset, while the LCD segments are all lit, hold down the START/ STOP and + keys until the Time window displays “EN”.
The LCD segments will be tested and will automatically light sequentially
The next display shows total usage time in the time window, software version In Speed window and odometer in distance window.
Press the DISPLAY key for distance reading setting, use up & down keys to adjust: 0 = Kilometers, 1 = Miles
Press the DISPLAY key for “distance per pedal revolution” setting: If the console is set to MILES, then the number shown will be how many feet are accumulated for each pedal revolution; the default is 6. If set to metric the number will be displayed in METERS; the default is 1.83. To adjust the desired settings, use the +/- keys
To clear odometer, press + and - at the same time. Press DISPLAY to exit.
13 | XG200 Elliptical |