3CONSOLE
1.Attach the transport wheels (77) to each bracket with the two bolts (44) and nuts (34). Partially tighten with the wrenches provided (110 & 111). Over tightening the hardware won’t allow the wheels to rotate.
2.Remove the cover on the back of the console and install the 4 C batteries.
3.Snap the four end caps (67) onto the cup washers on the left & right pedal arm assemblies.
HARDWARE
#44. 5/16” x | #34. 5/16” |
Bolt | Nut |
(2 pcs) | (2 pcs) |
XG200 Elliptical | 8 |
