![](/images/new-backgrounds/1222401/22240125x1.webp)
SETTING & OPERATING THE WATCH
SETTING TIME AND DATE
In this Programming Sequence, you will program the Time & Calendar functions.
1.In Time mode, PRESS & HOLD the MODE key to enter the programming sequence. The variable being adjusted will flash on and off.
2.Reset Seconds to zero (00) by PRESSING the START/STOP (S/S) or RESET (R) key. Advance to Set Minutes by PRESSING the MODE key.
3.Adjust Minutes by PRESSING S/S (to increase) or R (to decrease). Set Minutes and advance to Set Hour by PRESSING the MODE key.
4.Adjust Hour by PRESSING S/S or R. Set Hour and advance to Set Year by
PRESSING the MODE key.
5.Adjust Year by PRESSING S/S or R. Set by PRESSING MODE.
6.Adjust Month by PRESSING S/S or R. Set by PRESSING MODE.
7.Adjust Day by PRESSING S/S or R. Set by PRESSING MODE.
8.Adjust date format (month - day or day - month) by PRESSING S/S or R. Set Format by PRESSING MODE.
9.Adjust
ADJUST: S/S or R
SET: MODE
10.Turn Key Beep ON or OFF by PRESSING S/S or R. Set by PRESSING MODE.
11.PRESS & HOLD the MODE key to exit the Programming Sequence & resume Operating mode.
SOLO 915
SP4964IS03SPO.indd 10
10
7/28/10 3:42 PM