User Guide ERRATA
4.PairingtheAuraMobileBT™withaMobilePhone
•Make sure that your AMBT™ is powered on.
•Power on your Bluetooth® enabled mobile phone.
•To switch to Bluetooth® mode and connect to a Bluetooth® mobile phone, press and hold the Mode button until a chime sounds. Release .
•Press and hold the Mode button on your AMBT™. DO NOT release the Mode button until you hear a two note chime. The “Bluetooth” indicator will flash BOTH blue and amber. The AMBT™ is now ready for pairing.
NOTE: If no connection is established with a Bluetooth® mobile phone within 60 seconds, the AMBT™ will switch to idle mode, signaled by a flashing amber “Bluetooth” light. In this case, you must hold the button for 3 seconds until the “Bluetooth” light flashes blue and a tone sounds. Next, hold the button once again until the “Bluetooth” light flashes both blue and amber.
•Follow your mobile phone’s instruction guide to connect to a Bluetooth® device. Typically, you will click on a Bluetooth® icon and click “Discover device.”
•Your mobile phone should find the AMBT™ which is displayed as “BTHS”.
•Click on“BTHS”and click“OK”if your phone prompts you to confirm.
•Your mobile phone will then prompt you to enter a PIN or password. Enter: 0000
•If the pairing is successful, your mobile phone will
