WARNING
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
Do not use an extension cord or adapter plug with this appliance.
A.PREPARE CABINET
1.Disconnect the power supply. Turn water off. Put on gloves and safety glasses.
2.If you are replacing a dishwasher:
-Check that the water line “A” reaches to the back left of opening where the water connection will be made.
-Check that the direct line “B” reaches to the back left of
opening where the electrical connection will be made.
If the water line and the direct wire reach into the opening far
enough, go to step 10, page 12.
6” (15.2 cm)
If you are installing a new dishwasher , complete all of the following steps:
Electrical
Follow all national and local codes and ordinaces for completing electrical supply to cabinet.
If you are: | Use Steps: |
|
|
Direct Wiring | 3, 4 and 5 |
|
|
Using a Power Supply cord | 3a and 4a |
|
|
10
