5.Measure height of cabinet opening from underside
of countertop to floor where dishwasher will be installed “K” (you need the lowest point). Check chart for that height opening. Put wheels “L” in the required position. Turn both front leveler legs to the same height.
Min. Cutout | Wheel Position | Number of Turns |
Height | (See Illustration) | on Front Leg |
34” (86.4 cm) | 1 | 10 |
34¼” (87 cm) |
| Front Leg |
2 | 5 | |
34½” (87.6 cm) | 3 | 0 |
If the minimum cutout height is less than 34” (86.4 cm), the adjustable legs can be removed for additional clearance. This will allow the dishwasher to fit into a 334/5” (85.9 cm) high cutout, but the dishwasher will be more difficult to move into position. If the wheels are
removed, protect the floor when moving the dishwasher.
HELPFUL TIP:
Built-up floors.
Measure height of opening from underside of countertop to
Add shims as needed in the area shown to bring dishwasher up to proper height.
Note: Shims must be securely attached to floor to prevent their movement when the dishwasher is operated.
|
| Countertop |
|
|
| 33¾” |
|
|
| (85.7 cm) |
|
| Shim | min. |
|
| |||
|
| ||
|
| 2” | Shim |
Shim |
| (5.1 cm) | |
|
|
2¾” | 6” | 2¾” |
(7 cm) | (15.2 cm) | (7 cm) |
16