13.Check the door spring tension. With another person holding the dishwasher to prevent it from tipping, open and close the door a few times. If the door opens by itself, adjust the door spring tension.
To adjust the door spring tension, unhook the spring “T” from the rear leg of dishwasher. With a 5/16” nut driver or hex socket, remove the screw ”U” from the tensioner “V”. The screw can be put into one of three holes “1”, “2”, “3”, in front leg of dishwasher. The dishwasher is shipped with the screw in the back hole.
If the door opened by itself, move the tensioner to hole “2” or “3” and replace screw.
14.Grasp the dishwasher door at the edges of the door panel “W”. Tilt dishwasher backwards on wheels “X”. Move dishwasher close to cabinet opening. DO NOT
PUSH ON FRONT OF PANEL OR ON CONSOLE - THEY MAY DENT.
15.If dishwasher has a power supply cord, insert power supply cord into hole cut into cabinet.
16. Check that water line is on the left side of opening and drain hose is near the center of the hole in the cabinet. If using direct wire, check that it is on the right side of opening.
17. Carefully move dishwasher completely into cabinet opening. Do not kink or pinch copper tubing, drain hose, power supply cord or direct wire between dishwasher and cabinet.
Center dishwasher in opening.
18
