20. Check that leveling legs “AA” are firmly against the floor.
Close and latch the door, and place level against the front panel “BB”. Check that dishwasher is plumb. Adjust leveling leg or add shims under rear wheel until dishwasher is level.
NOTE: Shims must be securely attached to floor to prevent their movement when the dishwasher is operated.Repeat for other side of dishwasher.
Place level against top front opening of tub “CC”. Check that dishwasher is level from side to side. If dishwasher is not level, adjust front legs up or down until dishwasher is level.
C. CONNECT DISHWASHER
Electrical Connection
Check electrical requirements (see page 7).
You need to:
-Have the correct electrical supply and recommended grounding method.
-Check that power supply is disconnected.
If you are: | Use Steps: |
|
|
Direct Wiring |
|
| |
Using a Power Supply cord | 1a | Water Drain | Electrical |
20