Sprint Assembly
Battery Insert key into keyhole located by the
controller box and turn key counter clockwise while pressing it in, so that it arrives in the open position. Release the catch located at the underside of the saddle to flip it over. Locate the battery flanges in their slots in the battery holder; then push the battery firmly into the holder until the connecting pins are firmly in the battery sockets.
The fit can be tight when new, so it may be required to apply gentle pressure. Once the battery is in position, lock into place by turning the key one click clockwise to the “OFF” position. Ensure that the key is in “OFF” position until you are ready to ride.
6Do not use excessive force to fit the battery, which could result in damaging the connection sockets or pins.
If there is an A/C outlet near to where your bicycle is parked. It may not be necessary to remove the battery from the bicycle to charge.
TyresEnsure that the tyres are inflated to the correct pressure of 60 psi. Well inflated tyres enhances the comfort, safety and efficiency of your ride.
12
