
Removal and Replacement Procedures
5.20 Fan/Heat Sink Assembly
Fan/Heat Sink Assembly Spare Part Number Information
Fan/heat sink assembly for use only with computer models | |
using AMD processors |
|
Fan/heat sink assembly for use only with computer models | |
using Intel processors |
|
|
|
✎When replacing the fan/heat sink assembly, be sure the power button board is removed from the defective fan/heat sink assembly and installed on the replacement fan/heat sink assembly. Refer to Section 5.12, “Power Button Board,” for power button board removal information.
1.Prepare the computer for disassembly (Section 5.3) and remove the following components:
❏Hard drive (Section 5.4)
❏Memory module compartment cover (Section 5.6)
❏Optical drive (Section 5.9)
❏Switch cover (Section 5.10)
❏Keyboard (Section 5.11)
❏Display assembly (Section 5.13)
❏Top cover (Section 5.14)
❏System board (Section 5.19)
2.Turn the system board upside down with the expansion port 3 and external monitor port toward you.
Maintenance and Service Guide |