Compaq V6000 manual Disassembly Sequence Chart, # of Screws Removed

Removal and Replacement Procedures

5.2 Disassembly Sequence Chart

Use the chart below to determine the section number to be referenced when removing computer components.

Disassembly Sequence Chart

Section Description # of Screws Removed

5.3Preparing the Computer For Disassembly

	Battery	0
5.4	Hard Drive	2 loosened to remove the hard
		drive cover
		6 removed to disassemble the
		hard drive
5.5	Computer Feet	0
5.6	Memory Module	3 loosened to remove the
		memory module compartment
		cover
5.7	RTC Battery	0
5.8	Mini Card Module	2

	Ä To prevent an unresponsive system and the display of
	a warning message, install only a Mini Card device
	authorized for use in your computer by the governmental
	agency that regulates wireless devices in your country or
	region. If you install a device and then receive a warning
	message, remove the device to restore computer
	functionality. Then contact technical support by selecting
	Start > Help and Support > Contact support.
5.9	Optical Drive	1 to remove the optical drive
		2 to remove the optical drive
		bracket
5.10	Switch Cover	2 to remove the switch cover
		1 to remove the num lock
		board
5.11	Keyboard	3

Maintenance and Service Guide 5–3