Removal and Replacement Procedures
Display Assembly Subcomponents
Spare Part Number Information
Wireless antenna transceivers and cables | |
|
|
20.If it is necessary to replace the wireless transceivers and cables, remove the Phillips PM2.0×4.0 screw 1 that secures each transceiver to the display enclosure.
21.Remove the wireless antenna cables from the clips 2 built into the display enclosure.
22.Detach the wireless antenna transceivers 3 from the display enclosure.
23.Remove the wireless antenna cables 4.
Removing the Wireless Antenna Transceivers and Cables
Maintenance and Service Guide |
