Sprint Nextel U727 manual Tip, Applying your Mode Preference

⬤EVDO Only: Select the EVDO Only option if you would like to have Sprint Mobile Broadband connect to only 1xEV-DO networks. You can disable EVDO Mode at any time if you are not connected to any network by selecting another option.

⬤1xRTT Only: Select the 1xRTT Only option if you would like to have Sprint Mobile Broadband connect to only 1xRTT networks. When you apply this option, the next time you make a connection Sprint Mobile Broadband will search for only 1xRTT networks.

Note:

Sprint Mobile Broadband will always try to connect to a Sprint CDMA 1xEV-DO network first before attempting to connect to a 1xRTT network. 1xEV-DO networks always have priority! If a 1xEV-DO network is unavailable then Sprint Mobile Broadband will search for an available 1xRTT network.

Tip:

If the signal strength is too weak and you are unable to connect using 1xRTT in the 1900 MHz frequency, or if your connection fails due to this selection, disable the setting.

Applying your Mode Preference

1.Click OK or Apply on the Settings dialog box to reset your device. When you apply your service preference the following dialog will appear: “Service setting was changed successfully. Please wait while the modem is reset for the changes to take effect.”

2.Click OK to close the dialog box. When the device is reset the Go button will be visible and the Sprint Mobile Broadband user interface will display “Disconnected.” This may take a moment.

Section 2C: Menu Options 93