Using the External USB Cable and Clip Holder
To use the accessory pair:
1.Insert the USB modem into the clip holder. (The USB Connector must be visible through the holder.)
2.Plug one end of the USB Cable into the Type A USB port on your notebook.
3.Plug the wide end of the cable into the Sprint Mobile Broadband USB modem.
4.The device is powered as soon as the USB cable is plugged properly into the appropriate Type A USB port. (The LED indicator on the device will turn green.)
5.Place the device and the clip holder on the top of the notebook.
6.Start Sprint Mobile Broadband and click Connect.
Using the External Antenna Connector
An external antenna and external antenna adapter cable is included for use with the USB modem. An external antenna is useful when traveling in fringe coverage areas where the network signal may be weak. To use the external antenna adapter:
1.Locate the external antenna connector on the side of the device.
2.Remove the rubber protector to expose the connector. (Keep the rubber protector in a safe place for future use in order to protect the connector from debris when not in use).
3.Connect the external antenna adapter cable to the USB modem's connector.
4.Connect the other end of the external antenna adapter cable into the external antenna.