SD25 Series Screwdrivers

Reversing the Screwdriver

When the screwdriver is put into reverse, by sliding the forward/reverse switch into the reverse setting or remotely activating the FWD/REV input, the screwdriver turns in the opposite direction to the normal fastening direction. Reverse is indicated by the yellow, green and red LEDs chasing in a counterclockwise direction while the headlights remain lit. For most fastening operations, the screwdriver turns in a counterclockwise direction when in reverse, but for left-hand fastening applications it is clockwise.

Attaching a Pistol Grip Handle

The diagram below shows the SD25 Series In-line screwdriver with the throttle/trigger lever and spring removed and the Pistol Grip handle (part number 49-SD-10111) slid into place.

Multi-purpose (auxiliary) button

Forward/reverse switch

Push-to-start

LED illumination ring

Throttle/trigger lever

Holds the In-line screwdriver horizontally in the handle

5/32-in screw

Pin

Throttle/trigger lever

Left inset: The pistol grip handle (part number 49-SD-10111) in detail.

Page 12

T-40409-A

39-30-40409