SRS Labs manual Specifications, SR560 LOW-NOISEPREAMPLIFIER SPECIFICATIONS CHART

SPECIFICATIONS

SR560 LOW-NOISE PREAMPLIFIER SPECIFICATIONS CHART

Inputs	Single-ended or true differential
Impedance	100 MΩ + 25 pF, DC-coupled
Maximum Inputs	1 VDC before overload; 3 V peak to peak max AC coupled;
	protected to 100 VDC
Maximum Output	10 Vpp
Noise	<4 nV/√Hz at 1 kHz
CMRR	>90 dB to 1 kHz, decreasing by 6 dB / octave (20 dB / decade)
	above 1 kHz
Gain	1 to 50,000 in 1-2-5 sequence
	vernier gain in 0.5% steps
Frequency Response	Gains up to 1000, small signal
	±0.5 dB to 1 MHz
	±0.3 dB to 300 kHz
	-3 dB at 1 MHz, 1 Vpp output
Gain Stability	200 ppm /°C
DC Drift	5 µV/°C referred to input (DC coupled)
Filters	0.03 Hz to 1 MHz, 10% typical accuracy
Distortion	0.01% typical
Power	100, 120, 220, 240 VAC (50/60 Hz), 60 Watts Max
	Internal Batteries: 3 x 12 V, 1.9 Ah sealed
	lead-acid (rechargeable)
	±12 VDC in / out through rear panel banana jacks.
Battery Life	15 hours nominal
	250-1000 charge / discharge cycles
Charge Time	4 hours to 80% of capacity
Mechanical	1/2 Rack-Mount width, 3 1/2" height, weight 15 lbs.
Dimensions	14-7/8" x 8-1/8" x 3-1/2"
Warranty	1 year parts and labor on materials and workmanship

5